Hi N8VEM Fans,
On 9 Okt., 18:23, joebandit <bandit1...@cox.net> wrote:
> Other than the obvious Din connectors, could You give Us a required or
> needed parts list Andrew?
> Caps, Power connectors, what all of the single holes are for, I
> suspect a 1 pin header.
Backplane
ASSMANN APFEL or a other Manufacturer
DIN 41612
Type C, female, straight
Position with contacts
96abc*, 64ac*, 64ab, 32a, 48abc, 32ac*
Version a (tail length)
T -4mm*
T2.5 -2.5mm*
WAB -13mm*
WAA -13mm
WBB -17mm
WBA -17mm
W5 -5mm
W7 -7mm
* Standard
Board
ASSMANN APFEL or a other Manufacturer
DIN 41612
Type C, male, straight and angled
Position with contacts
96abc*, 64ac*, 64ab, 32a, 48abc, 32ac*
Version
R -angled
T -straight
* Standard
For the Board please the angled Version
Capacitors 100 nF for RM 5 mm
Spacing Disk Drive Power Connector
Pitch: 5.08 mm (.200")
Poles: 4
Rated Voltage: 250 AC.DC
Rated Current: 6 A
Applicable P.C.B Thickness: 1.6 mm
Applicable P.C.B Hole dia.: 0.9 mm + - 0.05
Rolf
Please note to get the DIN 41612 96 pin FEMALE connector for the ECB Backplane with the long solder tails. The ECB Backplane is double thickness and requires solder tails greater than 3.2 mm length. Jameco has part number 851500 which works fine.
http://www.jameco.com/Jameco/Products/ProdDS/851500.pdf
I used a couple Jameco SPDT mini-toggles - their p/n 26332 @ $1.39
Jack
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?&productId=26332
Rolf suggested this as a suitable switch
http://groups.google.com/group/n8vem/msg/30c916965659469b
From Rich Cini "This also goes for the power switch on the backplane (E-SWITCH 100SP1T2B4M6Q -- EG2362-ND). "
Comments (0)